Edward Getz's activity

From 03/18/2018 to 04/16/2018

04/16/2018

08:50 pm CMUcam5 Pixy Pixy Hardware: RE: Pan/tilt servos go crazy with arduino
Hi Bruno,
Here is some information that you might find useful:
http://cmucam.org/projects/cmucam5/wiki/Powering_P...
Edward Getz

04/13/2018

10:39 pm CMUcam5 Pixy Pixy Software: RE: libpixyusb_swig / python: USB disconnect / re-connect from Pixy is not detected
Hello Sal,
That's correct --- if pixy_init() returns an error (<0), there was some kind of problem connecting to Pi...
Edward Getz

04/09/2018

11:28 am CMUcam5 Pixy Pixy Software: RE: Pixy lost programming/trained signatures
Hello Alex,
Are you using the most recent firmware version?
http://cmucam.org/projects/cmucam5/wiki/Latest_relea...
Edward Getz
11:24 am CMUcam5 Pixy Pixy Software: RE: Pixy problem with Ardumoto
Hello Mehmet,
This is usually due to a low voltage problem. The servos tend to act strangely when there isn't enou...
Edward Getz
11:21 am CMUcam5 Pixy Pixy Hardware: RE: Replace Pixy lens for a thermal camera
Hi Pedro,
The lens on Pixy can be replaced, but a thermal IR sensor is a different kind of device altogether. Ther...
Edward Getz

04/06/2018

11:00 pm CMUcam5 Pixy Pixy Software: RE: How to output Motor Positions of Pan/Tilt motors as Int values?
Hi Michael,
What seems to be the problem-- are you not getting output, or does the output appear to be incorrect? ...
Edward Getz
10:52 pm CMUcam5 Pixy Pixy Hardware: RE: Replace Pixy lens for a thermal camera
Hi Pedro,
The sensor and lens of Pixy can't be replaced by this product. (sorry)
Edward
Edward Getz

03/29/2018

05:35 pm CMUcam5 Pixy Pixy Software: RE: Can pixy cam measure a distance between it and an object
Hello,
Have you looked at the hello_world program for Arduino? It is a good place to start:
http://cmucam.org...
Edward Getz
05:33 pm CMUcam5 Pixy Pixy Software: RE: panError
Hello,
Are you using an Arduino? These links are a good start:
http://cmucam.org/projects/cmucam5/wiki/Hooking_...
Edward Getz

03/23/2018

07:03 pm CMUcam5 Pixy Pixy for LEGO Mindstorms: RE: problems with running demos
Hello Leo,
This is a good program to test your cable, etc:
http://cmucam.org/projects/cmucam5/wiki/Pixy_LEGO_Qui...
Edward Getz

03/18/2018

12:13 am CMUcam5 Pixy Pixy Hardware: RE: My Pixy Cam seems to have dead pixels
Hi Ronald, sorry for the problem. We clean and test the sensor before we ship, but sometimes a piece of dust or smal... Edward Getz
« Previous
Next »
 

Also available in: Atom