I2C Wiring

Added by Jeff M almost 2 years ago

I am trying to communicate with a Pixy CMUCam5 over I2c. I am powering the Pixy with a 6Vdc supply to the 6-10V Power Input, and grabbing I2C from the I/O Port. Do I only need to connect SDA (pin 9) and SCL (pin 5) to the Robot I/O controller?

Thanks
Jeff


Replies (1)

RE: I2C Wiring - Added by Edward Getz almost 2 years ago

Hello Jeff,
That's correct, and ground of course :)

This page has some useful information:

http://cmucam.org/projects/cmucam5/wiki/Porting_Guide

Edward

(1-1/1)