Wiki

Version 34 (Kwabena Agyeman, 03/13/2012 04:32 pm) → Version 35/44 (Kwabena Agyeman, 03/13/2012 04:35 pm)

h1. Wiki

!http://cmucam.org/attachments/344/camfrontright.jpg! !http://cmucam.org/attachments/343/camfront.jpg! !http://cmucam.org/attachments/342/camboard.jpg! !http://cmucam.org/attachments/341/botfrontright.jpg!

h3. *Quick Links*

* [[Gallery]]
* [[Downloads]]
* [[FAQ]]
* [[Publications]]
* [[People]]
* [[Issues]]
* "Toy Robots Initiative":http://www.cs.cmu.edu/~illah/EDUTOY/

* [[Legal Information]]

h3. *Typical Uses*

The CMUcam1 can be used to track or monitor colors. The best performance can be achieved when there are highly contrasting and intense colors. For instance, it can easily track a red ball on a white background, but it would be hard to differentiate between different shades of brown in changing light. Tracking colorful objects can be used to localize landmarks, follow lines, or chase moving beacons. Using color statistics, it is possible for the CMUcam1 to monitor a scene, detect a specific color or do primitive motion detection. If the CMUcam1 detects a drastic color change, then chances are something in the scene changed. Using “line mode”, the CMUcam1 can generate low resolution binary images of colorful objects. This can be used to do more sophisticated image processing that includes branch detection, or even simple shape recognition. These more advanced operations require custom algorithms to post process the binary images sent from the CMUcam1. As is the case with a normal digital camera, this type of processing might require a computer or at least a fast microcontroller.

h3. *Typical Configuration*

The most common configuration for the CMUcam1 CMUcam is to have it communicate to a master processor
via a standard RS232 serial port. This “master processor” could be a computer, PIC, Basic Stamp, Handy
Board, Brainstem or similar microcontroller. microcontroller setup. The CMUcam1 CMUcam is small enough to add simple vision to
embedded systems that can not afford the size or power of a standard computer based vision system. Its
communication protocol is designed to accommodate even the slowest of processors. If your device does
not have a fully level shifted serial port, you can also communicate to the CMUcam1 CMUcam over its the TTL serial
port. This is the same as a normal serial port except that the data is transmitted using 0 to 5 volt logic. The CMUcam1
CMUcam
supports various baud rates to accommodate slower processors. For even slower processors, the
camera can operate in “poll mode”. (See “PM” command pg 22.) In this mode, the host processor can ask
the CMUcam1 CMUcam for just a single packet of data. This gives slower processors the ability to more easily stay
synchronized with the data. It is also possible to add a delay between individual serial data characters using
the “delay mode” command. (See “DM” command pg 19.) Due to the communication delays, both poll
mode and delay mode will lower the total number of frames frame rate that can be processed in one second. processed.