CMUcam4 Graphical User Interface

Version 61 (Kwabena Agyeman, 03/11/2013 08:09 pm)

1 6 Kwabena Agyeman
h1. CMUcam4 Graphical User Interface
2 1 Kwabena Agyeman
3 1 Kwabena Agyeman
h3. *Windows Setup*
4 7 Kwabena Agyeman
5 26 Kwabena Agyeman
Follow the steps below to setup the CMUcam4GUI for Windows:
6 10 Kwabena Agyeman
7 61 Kwabena Agyeman
p(. 1. Download the "CMUcam4GUI.zip":/attachments/download/796/CMUcam4GUI_windows_100.zip file
8 33 Kwabena Agyeman
    2. Unzip it and extract the contents
9 38 Kwabena Agyeman
    3. Run the CMUcam4GUI.exe file
10 26 Kwabena Agyeman
11 1 Kwabena Agyeman
h3. *Linux Setup*
12 25 Kwabena Agyeman
13 26 Kwabena Agyeman
Follow the steps below to setup the CMUcam4GUI for Linux:
14 10 Kwabena Agyeman
15 31 Kwabena Agyeman
p(. 1. Add your user name to the dialout group
16 26 Kwabena Agyeman
17 1 Kwabena Agyeman
<pre>
18 1 Kwabena Agyeman
sudo adduser username dialout
19 1 Kwabena Agyeman
</pre>
20 10 Kwabena Agyeman
21 31 Kwabena Agyeman
p(. 2. Now verify by typing
22 1 Kwabena Agyeman
23 1 Kwabena Agyeman
<pre>
24 1 Kwabena Agyeman
groups username
25 1 Kwabena Agyeman
</pre>
26 24 Kwabena Agyeman
27 29 Kwabena Agyeman
p(. 3. Now log out and then log back in
28 40 Kwabena Agyeman
    4. Download the "CMUcam4GUI.zip":/attachments/784/CMUcam4GUI.zip file
29 30 Kwabena Agyeman
    5. Unzip it and extract the contents
30 30 Kwabena Agyeman
    6. Run the CMUcam4GUI file
31 24 Kwabena Agyeman
32 57 Kwabena Agyeman
*There might be some shared library issues with this version... if it doesn't run... please use the windows version - Kwabena
33 57 Kwabena Agyeman
http://www.trinitydesktop.org/docs/qt4/deployment-x11.html*
34 54 Kwabena Agyeman
35 24 Kwabena Agyeman
h3. *Macintosh Setup*
36 17 Kwabena Agyeman
37 26 Kwabena Agyeman
Follow the steps below to setup the CMUcam4GUI for Macintosh:
38 26 Kwabena Agyeman
39 60 Kwabena Agyeman
p(. 1. Install the QtSDK for Mac "here":http://www.developer.nokia.com/info/sw.nokia.com/id/da8df288-e615-443d-be5c-00c8a72435f8/Qt_SDK.html.
40 60 Kwabena Agyeman
    2. Download the "CMUcam4GUI Source":http://cmucam.org/attachments/785/CMUcam4GUI.zip
41 60 Kwabena Agyeman
    3. Open the CMUcam4GUI.pro file using QtCreator
42 60 Kwabena Agyeman
    4. Run the CMUcam4GUI in release mode (debug mode works too). 
43 1 Kwabena Agyeman
44 60 Kwabena Agyeman
_Question: Why don't you have a prebuilt MAC application?_
45 51 Kwabena Agyeman
46 60 Kwabena Agyeman
_Answer: Kwabena, the CMUcam4 developer, does not have a MAC_ 
47 59 Kwabena Agyeman
48 59 Kwabena Agyeman
Note: The Macintosh version runs at a maximum baud rate of 115,000 BPS versus the Windows and Linux versions that run at a maximum baud rate of 230,400 BPS. If you can, please use the Windows or Linux versions for faster functionality.
49 55 Kwabena Agyeman
50 1 Kwabena Agyeman
h3. *CMUcam4GUI Manual*
51 1 Kwabena Agyeman
52 1 Kwabena Agyeman
_Coming Soon_
53 45 Kwabena Agyeman
54 45 Kwabena Agyeman
If you encounter errors trying to connect to the CMUcam4, unplug your USB to serial device from the PC and plug it back in again. Also, make sure your serial converter can handle 115200 BPS and 230400 BPS. If you are using a FTDI chip then you'll be fine.
55 37 Kwabena Agyeman
56 39 Kwabena Agyeman
h3. *CMUcam4GUI Source*
57 43 Kwabena Agyeman
58 43 Kwabena Agyeman
Click "here":/attachments/785/CMUcam4GUI.zip to download the source code for the CMUcam4GUI.
59 43 Kwabena Agyeman
60 46 Kwabena Agyeman
You will need the Qt 1.2.1 SDK (Desktop 4.8.1) to compile the code which you can download "here":http://www.developer.nokia.com/info/sw.nokia.com/id/da8df288-e615-443d-be5c-00c8a72435f8/Qt_SDK.html.