Assembling pantilt Mechanism

Version 3 (Rich LeGrand, 02/19/2014 09:38 pm)

1 1 Rich LeGrand
h1. Assembling pan/tilt Mechanism
2 1 Rich LeGrand
3 2 Rich LeGrand
The pan/tilt mechanism when combined with Pixy, makes a fun demo — a good “hello world” for Pixy (no Arduino required). The Pixy pan/tilt mechanism comes in a kit and requires some assembly.
4 2 Rich LeGrand
5 3 Rich LeGrand
You will need (in addition to a Pixy and a pan/tilt kit):
6 2 Rich LeGrand
7 3 Rich LeGrand
A small phillips screwdriver
8 3 Rich LeGrand
!{width: 15%}http://i74.photobucket.com/albums/i241/cmucam/IMG_4409_zpsc3cbdd1e.jpg!
9 1 Rich LeGrand
10 3 Rich LeGrand
pliers
11 3 Rich LeGrand
!{width: 15%}http://i74.photobucket.com/albums/i241/cmucam/IMG_4439_zps05b710ee.jpg!
12 1 Rich LeGrand
13 3 Rich LeGrand
small wire cutters
14 3 Rich LeGrand
!{width: 15%}http://i74.photobucket.com/albums/i241/cmucam/IMG_4408_zps1c3bcd31.jpg!
15 3 Rich LeGrand
16 3 Rich LeGrand
1. Remove the paper backing on the body.
17 3 Rich LeGrand
18 3 Rich LeGrand
!{width: 40%}http://i74.photobucket.com/albums/i241/cmucam/IMG_4407_zps35303bd8.jpg!
19 3 Rich LeGrand
 
20 3 Rich LeGrand
21 2 Rich LeGrand
22 2 Rich LeGrand
23 2 Rich LeGrand