Expert Pane

Version 11 (Rich LeGrand, 08/12/2015 03:50 pm)

1 6 Rich LeGrand
h1. Expert Tab
2 1 Rich LeGrand
3 6 Rich LeGrand
This tab contains more advanced parameters for adjusting various Pixy things.  To bring up the Expert Tab, first bring up the Configure Dialog (click on the gear icon or select *File➜Configure*). Now select the *Expert* tab under *Pixy Parameters*.  
4 1 Rich LeGrand
5 8 Rich LeGrand
6 1 Rich LeGrand
7 7 Jesse French
* *Color code multiplier:* The signatures associated with color codes can be more inclusive, because false positives are less likely.  Also, the color swatches used with color codes may be somewhat reflective, which requires a more inclusive signature.  The *Color code multiplier* is multiplied by the corresponding *Signature range* (in the "Signature Tuning Tab":/projects/cmucam5/wiki/Signature_Tuning_Pane) to create the signature range for the color code. 
8 1 Rich LeGrand
9 7 Jesse French
* *Color code mode:* This parameter sets the behavior of color codes, including enabling/disabling.  Hovering the mouse over the parameter will provide information on the available settings. 
10 11 Rich LeGrand
11 11 Rich LeGrand
12 1 Rich LeGrand
13 7 Jesse French
* *Signature teach threshold:* This parameter applies when you are teaching Pixy a signature using the button-push method.  It allows you to adjust how inclusive Pixy is when determining which pixels are part of the object you are trying to teach.  You can find more information "here":/projects/cmucam5/wiki/Some_Tips_on_Generating_Color_Signatures_2.
14 4 Rich LeGrand
15 4 Rich LeGrand
The short video below shows the teach threshold in action:
16 5 Rich LeGrand
17 4 Rich LeGrand
{{youtube(tJ7CZfvsbz8, 480, 360)}}
18 1 Rich LeGrand
19 7 Jesse French
* *LED brightness:* sets the brightness of Pixy's RGB LED.  Pixy's LED is quite bright if you want it to be (too bright to look at!)  
20 1 Rich LeGrand
21 9 Rich LeGrand
* *Startup program:* This parameter sets the program that gets executed upon power-up. The available programs are listed in the pulldown menu.
22 1 Rich LeGrand
23 7 Jesse French
* *Debug:* sets the debug level within Pixy. Setting the value to 0 means that no debugging information is displayed.