My pantilt is acting sort of crazy

Version 7 (Rich LeGrand, 05/09/2014 01:22 pm)

1 1 Rich LeGrand
h1. My pan/tilt is acting sort of crazy
2 1 Rich LeGrand
3 5 Rich LeGrand
The pan/tilt mechanism should track objects smoothly.  If it doesn't, here are a few things to try/check. 
4 1 Rich LeGrand
5 6 Rich LeGrand
h2. 1. Try a different USB cable
6 1 Rich LeGrand
7 7 Rich LeGrand
Powering servos over USB is great because you don't need to worry about batteries, but there can be problems with not enough voltage reaching the servos.  Always use a USB cable that's 3 feet or shorter, and if it's still having problems try another cable if you can.  USB cables aren't all created equal -- some have flimsy-gauge wire that can cause problems.   
8 5 Rich LeGrand
9 5 Rich LeGrand
h2. 2. Check to make sure there is no mechanical binding
10 5 Rich LeGrand
11 1 Rich LeGrand
Unplug Pixy from power/USB and gently check the pan axis by moving it back and forth over its entire travel.  It should move fairly easily and smoothly.  Then test the tilt axis by moving the *servo horn* back and forth (not Pixy!).  It too should move fairly easily and smoothly and not bind on any cables.
12 1 Rich LeGrand
13 1 Rich LeGrand
When Pixy is plugged into the USB cable, make sure there is plenty of cable for Pixy to look up and down, left and right.  
14 1 Rich LeGrand
15 5 Rich LeGrand
h2. 3. Check the connections
16 3 Rich LeGrand
17 1 Rich LeGrand
This is an obvious one, but make sure the connectors that plug into Pixy are secure and fully engaged (you shouldn't see any of the terminal posts on Pixy -- each servo connector should completely cover the terminal posts on Pixys servo connector.)  
18 1 Rich LeGrand
19 5 Rich LeGrand
h2. 4. Does the pan/tilt seem to avoid the object?
20 1 Rich LeGrand
21 1 Rich LeGrand
That's not good!  But it's usually caused by the pan and tilt servos being swapped where they plug into Pixy.  Try swapping the servo connectors where they plug into Pixy so they are correct.
22 1 Rich LeGrand
23 5 Rich LeGrand
h2. 5. Do you get a good solid rectangle in PixyMon when running the "pan/tilt demo"?
24 1 Rich LeGrand
25 1 Rich LeGrand
If the rectangle changes shape rapidly or you see lots of rectangles (detected objects), Pixy will have a hard time tracking.  You should probably re-teach.  Or you may need to adjust some parameters -- consult [[Some Tips on Generating Color Signatures|this guide]] to learn more.
26 1 Rich LeGrand
27 5 Rich LeGrand
h2. 6. Test the servos
28 1 Rich LeGrand
29 2 Rich LeGrand
Run PixyMon and hit the stop button (upper left corner of PixyMon).  In the command window type this, hitting <return> after each line:
30 1 Rich LeGrand
31 2 Rich LeGrand
32 2 Rich LeGrand
rcs_setPos 0 1000
33 2 Rich LeGrand
rcs_setPos 0 0 
34 2 Rich LeGrand
rcs_setPos 1 1000 
35 2 Rich LeGrand
rcs_setPos 1 0 
36 2 Rich LeGrand
37 1 Rich LeGrand
38 1 Rich LeGrand
This should exercise the pan servo first then the tilt servo.  The movement should be smooth and rapid.  If not, make a note of which servo is acting strange. and send us an email describing your experience (
39 1 Rich LeGrand
40 1 Rich LeGrand
41 1 Rich LeGrand
42 1 Rich LeGrand