Pantilt Demo Pane

Version 1 (Rich LeGrand, 01/19/2015 10:15 pm)

1 1 Rich LeGrand
h1. Pan/tilt Demo Pane
2 1 Rich LeGrand
3 1 Rich LeGrand
This pane contains parameters to adjust parameters associated with the pan/tilt demo, like the PID gains for each axis.  To bring up the Pan/tilt Demo Pane, first bring up the Configure Dialog (click on the gear icon or select *File➜Configure*). Now select the *Pan/Tilt Demo* pane under *Pixy Parameters*.  
4 1 Rich LeGrand
5 1 Rich LeGrand
!http://i74.photobucket.com/albums/i241/cmucam/Image163_zpsd178a0d5.jpg!
6 1 Rich LeGrand
7 1 Rich LeGrand
8 1 Rich LeGrand
* *Data out port* This parameter selects the output port.  Hovering the mouse over the parameter will provide information on the available port settings.
9 1 Rich LeGrand
10 1 Rich LeGrand
* *I2C address* This parameter sets Pixy's I2C address if the *Data out port* is configured for I2C.
11 1 Rich LeGrand
 
12 1 Rich LeGrand
* *UART baudrate* sets the baud rate if the *Data out port* is configured for UART.