Version 1/8 - Next ยป - Current version
Rich LeGrand, 01/19/2015 10:15 pm

Pan/tilt Demo Pane

This pane contains parameters to adjust parameters associated with the pan/tilt demo, like the PID gains for each axis. To bring up the Pan/tilt Demo Pane, first bring up the Configure Dialog (click on the gear icon or select File➜Configure). Now select the Pan/Tilt Demo pane under Pixy Parameters.

  • Data out port This parameter selects the output port. Hovering the mouse over the parameter will provide information on the available port settings.
  • I2C address This parameter sets Pixy's I2C address if the Data out port is configured for I2C.
  • UART baudrate sets the baud rate if the Data out port is configured for UART.