- Registered on: 05/10/2012
- Last connection: 07/04/2012
Reported issues: 0
- 03:11 pm CMUcam4 General Questions: RE: Upgrade Firmware
- So I plug an external 7.5 V sources to the DC Barrel Jack, but it does the same.
During the installation of the pr...
I would like to upgrade the CmuCam4 firmware to v102, but the card is not recognized by the Propeller Tool.
- 09:11 am CMUcam4 Getting Started: RE: sending commands from Parallax Serial Terminal
- I bent the DTR line and now all is fine.
- 05:35 pm CMUcam4 Getting Started: RE: sending commands from Parallax Serial Terminal
- Yes, I'm pressing enter after typing a command.
When using TeraTerm/Putty/Arduino Serial Terminal, only the green ...
I try to send command to the CMUCam4, but it does not respond.
The CMUCam is connected to my computer (seve...
Also available in: Atom