Rand Vibe

  • Email:
  • Registered on: 08/30/2017
  • Last connection: 09/13/2017

Activity

Reported issues: 0

09/13/2017

08:48 pm CMUcam5 Pixy Pixy Software: RE: Pixy Camera with Teensy 3.5 and SPI
Here's a diagram found by @tarzan from the Teensy forum. It verifies the SPI 3.3V pins. This is good news. No need...
01:04 am CMUcam5 Pixy Pixy Software: RE: Pixy Camera with Teensy 3.5 and SPI
Edward Getz wrote:
> Hello Rand,
> The SPI signals are 0 to 3.3V. Pixy runs off of 5V, but none of its signals ar...

09/12/2017

09:01 pm CMUcam5 Pixy Pixy Software: RE: Pixy Camera with Teensy 3.5 and SPI
The aforementioned Pixy functions for SPI communication with the Teensy 3.5 are working well. Now I want to try the s...

09/07/2017

03:50 am CMUcam5 Pixy Pixy Software: RE: Pixy Camera with Teensy 3.5 and SPI
Hello Jesse, I understand the Pixy is the slave, but there should be a maximum clock rate it can handle. Is it 1 Mhz...

08/31/2017

04:31 am CMUcam5 Pixy Pixy Software: RE: Pixy Camera with Teensy 3.5 and SPI
Yes, I was able to configure my Pixy board through the PixyMon app. When I choose SPI with SS, it does not allow me ...

08/30/2017

06:06 am CMUcam5 Pixy Pixy Software: Pixy Camera with Teensy 3.5 and SPI
A couple of years ago I transitioned from the Arduino-Due to Teensy, specifically Teensy 3.2 and recently 3.5 & 3.6. ...

Also available in: Atom