Rich Riendeau

  • Email:
  • Registered on: 04/11/2014
  • Last connection: 09/30/2014

Activity

Reported issues: 0

09/30/2014

02:48 pm CMUcam5 Pixy Pixy Software: Setting servo position with i2c with arduino?
Hello everyone,
I have seen in the SPI code that there is a way to set the pan and tilt servo positions via a prot...

06/12/2014

08:38 am CMUcam5 Pixy Pixy Software: RE: Example/documentation as to the tool chain required for build pixy firmware...
I am not involved in the gcc port and am waiting also. I looked into the existing toolchain only to conclude you need...

06/11/2014

09:28 pm CMUcam5 Pixy Pixy Software: RE: Example/documentation as to the tool chain required for build pixy firmware...
It was my understanding the free version of the toolkit will not produce a binary large enough to run pixy firmware. ...

05/27/2014

12:24 pm CMUcam5 Pixy Pixy Software: RE: Example/documentation as to the tool chain required for build pixy firmware...
Thanks...

05/22/2014

09:31 am CMUcam5 Pixy Pixy Software: Example/documentation as to the tool chain required for build pixy firmware...
In other areas of the forum it was indicated that the GNU toolchain is currently not supported in building the pixy f...

04/11/2014

01:45 pm CMUcam5 Pixy Pixy Software: RE: Mac software crashes on Mac osx lion
Tried sudo and swapped out the cable to no effect. (This cable I am using know works with my camcorder)
I did noti...
08:14 am CMUcam5 Pixy Pixy Software: RE: Mac software crashes on Mac osx lion
Please note that running piximon 1.4.7 on macos 10.7.5 no longer crashes, but fails to find any pixy devices attached...

Also available in: Atom